New AMD system crashing on resuming from hibernation. Plz help.

Ahmed79

New Member
Local time
4:50 PM
Posts
17
Thread starter
Okay, I've restarted WDV will all custom settings except (0x00000004) Randomized low resources simulation .. and selected all non MS drivers.

I can feel that the startup is slow and PC running sluggishly after enabling WDV.

C:\Windows\system32>verifier /querysettings

Verifier Flags: 0x03bfefbb

Standard Flags:

[X] 0x00000001 Special pool.
[X] 0x00000002 Force IRQL checking.
[X] 0x00000008 Pool tracking.
[X] 0x00000010 I/O verification.
[X] 0x00000020 Deadlock detection.
[X] 0x00000080 DMA checking.
[X] 0x00000100 Security checks.
[X] 0x00000800 Miscellaneous checks.
[X] 0x00020000 DDI compliance checking.

Additional Flags:

[ ] 0x00000004 Randomized low resources simulation.
[X] 0x00000200 Force pending I/O requests.
[X] 0x00000400 IRP logging.
[X] 0x00002000 Invariant MDL checking for stack.
[X] 0x00004000 Invariant MDL checking for driver.
[X] 0x00008000 Power framework delay fuzzing.
[X] 0x00010000 Port/miniport interface checking.
[X] 0x00040000 Systematic low resources simulation.
[X] 0x00080000 DDI compliance checking (additional).
[X] 0x00200000 NDIS/WIFI verification.
[X] 0x00800000 Kernel synchronization delay fuzzing.
[X] 0x01000000 VM switch verification.
[X] 0x02000000 Code integrity checks.

Internal Flags:

[X] 0x00100000 Extended Verifier flags (internal).

[X] Indicates flag is enabled.

Boot Mode:

Persistent

Rules:

All rules are using default settings

Extensions:

wdm: rules.all
ndis: rules.default

Verified Drivers:

secnvme.sys
cimfs.sys
cfosspeed6.sys
msio64.sys
netwtw04.sys
amdpcidev.sys
nvlddmkm.sys
amdgpio2.sys
nvvad64v.sys
nvmoduletracker.sys
nvvhci.sys
nahimic_mirroring.sys
rtkvhd64.sys
nvhda64v.sys
ibtusb.sys
dump_diskdump.sys
dump_secnvme.sys
dump_dumpfve.sys
amdryzenmasterdriver.sys
ntiolib_x64.sys
mpksldrv.sys
ndis.sys
netadaptercx.sys
mbbcx.sys
wificx.sys
wdiwifi.sys

I'll run the WDV for 36hrs and report back with any new development here during this period.

Thanks.
 

My Computer

System One

  • Operating System
    Windows 10

Ahmed79

New Member
Local time
4:50 PM
Posts
17
Thread starter
I've been running the PC for more than 24hrs+ and its rock steady , also did some gaming too... no crashes or hangs or BSODs.

Shall I disable WDV and enable hibernation now to test if the problem is fixed or continue with WDV for longer?

Thanks.
 

My Computer

System One

  • Operating System
    Windows 10

zbook

Active Member
Member
VIP
Local time
6:50 PM
Posts
244
Please complete WDV testing > before completion post query results

Then run the power troubleshooter > post images with detailed results > post a new V2 > run: powercfg -h on
 

My Computer

System One

  • Operating System
    Windows 10

Ahmed79

New Member
Local time
4:50 PM
Posts
17
Thread starter
Okay, its 36hrs by now, no BSODs or crashes on boot.

I've also installed a new 2TB HDD (just FYI).

Microsoft Windows [Version 10.0.19043.1023]
(c) Microsoft Corporation. All rights reserved.

C:\Windows\system32>verifier /querysettings

Verifier Flags: 0x03bfefbb

Standard Flags:

[X] 0x00000001 Special pool.
[X] 0x00000002 Force IRQL checking.
[X] 0x00000008 Pool tracking.
[X] 0x00000010 I/O verification.
[X] 0x00000020 Deadlock detection.
[X] 0x00000080 DMA checking.
[X] 0x00000100 Security checks.
[X] 0x00000800 Miscellaneous checks.
[X] 0x00020000 DDI compliance checking.

Additional Flags:

[ ] 0x00000004 Randomized low resources simulation.
[X] 0x00000200 Force pending I/O requests.
[X] 0x00000400 IRP logging.
[X] 0x00002000 Invariant MDL checking for stack.
[X] 0x00004000 Invariant MDL checking for driver.
[X] 0x00008000 Power framework delay fuzzing.
[X] 0x00010000 Port/miniport interface checking.
[X] 0x00040000 Systematic low resources simulation.
[X] 0x00080000 DDI compliance checking (additional).
[X] 0x00200000 NDIS/WIFI verification.
[X] 0x00800000 Kernel synchronization delay fuzzing.
[X] 0x01000000 VM switch verification.
[X] 0x02000000 Code integrity checks.

Internal Flags:

[X] 0x00100000 Extended Verifier flags (internal).

[X] Indicates flag is enabled.

Boot Mode:

Persistent

Rules:

All rules are using default settings

Extensions:

wdm: rules.all
ndis: rules.default

Verified Drivers:

secnvme.sys
cimfs.sys
cfosspeed6.sys
msio64.sys
netwtw04.sys
amdpcidev.sys
nvlddmkm.sys
amdgpio2.sys
nvvad64v.sys
nvmoduletracker.sys
nvvhci.sys
nahimic_mirroring.sys
nvhda64v.sys
rtkvhd64.sys
ibtusb.sys
dump_diskdump.sys
dump_secnvme.sys
dump_dumpfve.sys
amdryzenmasterdriver.sys
ntiolib_x64.sys
mpksldrv.sys
ndis.sys
netadaptercx.sys
mbbcx.sys
wificx.sys
wdiwifi.sys

Ran V2 , report attached.

Can you plz check in that if the memory dump settings (as well as other settings) that you suggested in your first reply are still activated or disabled now since the system restore I performed day before yesterday to get back into Windows?
If they are disabled and back to default then please let me know which ones I need to enable again for maximum information to be recorded in the memory dump in case of a BSOD/crash again.

Going to disable WDV and enable hibernation with powercfg -h on

Ran the power troubleshooter.

Thanks.

Issues found
Time before hard disk goes to sleep is too long
Time before hard disk goes to sleep is too long
The period of time before a hard disk enters sleep mode is longer than the default setting, and might affect power usage.
Fixed
Fixed
Restore the default setting for turning off hard disk(s)Completed
Time before computer goes to sleep is too long
Time before computer goes to sleep is too long
The period of time before your computer enters sleep mode is longer than the default setting, and might affect power usage.
Fixed
Fixed
Restore the default sleep setting for the computerCompleted
Screen saver is enabled
Screen saver is enabled
Using a screen saver instead of having the display go to sleep uses more power.
Fixed
Fixed
Disable screensaverCompleted

Potential issues that were checked
Time before display dims is too long
Time before display dims is too long
The period of time before a display dims is longer than the default setting, and might affect power usage.
Issue not present
Time before display goes to sleep is too long
Time before display goes to sleep is too long
The period of time before a display turns off is longer than the default setting, and might affect power usage.
Issue not present
Power plan set to High Performance
Power plan set to High Performance
High Performance uses additional power and might prevent the computer from entering sleep mode.
Issue not present
Minimum processor state is set too high
Minimum processor state is set too high
When this value is set higher than the default setting, the processor uses additional power.
Issue not present
Display brightness setting is too high
Display brightness setting is too high
The brightness setting for the display is higher than the default setting.
Issue not present
USB Selective Suspend is disabled
USB Selective Suspend is disabled
USB Selective Suspend allows the hub driver to suspend an individual port without affecting the operation of the other ports on the hub. This feature is useful for reducing power usage.
Issue not present
Wireless adapter is not optimized for power saving
Wireless adapter is not optimized for power saving
Wireless adapter setting uses additional battery power.
Issue not present

Issues found
6Time before hard disk goes to sleep is too longFixed
Fixed
The period of time before a hard disk enters sleep mode is longer than the default setting, and might affect power usage.
Restore the default setting for turning off hard disk(s)Completed
Restoring the timeout setting to the recommended value will help reduce power used by the hard disk.
Informational

Disk Idle Timeout Adjustment
Original AC Setting:0
New AC Setting:1200
6Time before computer goes to sleep is too longFixed
Fixed
The period of time before your computer enters sleep mode is longer than the default setting, and might affect power usage.
Restore the default sleep setting for the computerCompleted
Restoring the timeout setting to the recommended value will help reduce power used by the computer.
Informational

Idle Sleep Setting Adjustment
Original AC Setting:0
New AC Setting:1800
6Screen saver is enabledFixed
Fixed
Using a screen saver instead of having the display go to sleep uses more power.
Disable screensaverCompleted
Turning the screen saver off will help reduce power usage.

Potential issues that were checked
Time before display dims is too longIssue not present
The period of time before a display dims is longer than the default setting, and might affect power usage.
Time before display goes to sleep is too longIssue not present
The period of time before a display turns off is longer than the default setting, and might affect power usage.
Power plan set to High PerformanceIssue not present
High Performance uses additional power and might prevent the computer from entering sleep mode.
Minimum processor state is set too highIssue not present
When this value is set higher than the default setting, the processor uses additional power.
Display brightness setting is too highIssue not present
The brightness setting for the display is higher than the default setting.
USB Selective Suspend is disabledIssue not present
USB Selective Suspend allows the hub driver to suspend an individual port without affecting the operation of the other ports on the hub. This feature is useful for reducing power usage.
Wireless adapter is not optimized for power savingIssue not present
Wireless adapter setting uses additional battery power.
Detection details
Expand

Collection information
Computer Name: DESKTOP-2V23DDE
Windows Version:10.0
Architecture:x64
Time:Thursday, June 10, 2021 12:33:39 PM
Publisher details
Expand

Power
Find and fix problems with your computer's power settings to conserve power and extend battery life.
Package Version:1.5
Publisher:Microsoft Windows

Power
Find and fix problems with your computer's power settings to conserve power and extend battery life.
Package Version:1.5
Publisher:Microsoft Corporation
 

Attachments

  • Power Troubleshooter.jpg
    Power Troubleshooter.jpg
    83.2 KB · Views: 4
  • DESKTOP-2V23DDE-(2021-06-10_12-37-20).zip
    1.3 MB · Views: 4

My Computer

System One

  • Operating System
    Windows 10

zbook

Active Member
Member
VIP
Local time
6:50 PM
Posts
244
The last BSOD was on 6/7/2021 while using WDV.
My PC hanged today on resume from hibernation.

I didn't get any BSOD, it just hanged while resuming.

The mini dump is here:



That was a BSOD

Fri Jun 11 15:37:43.067 2021 (UTC - 5:00)

Upload a new V2 and if avail a memory.dmp.

I'll view what you post later in the day.
 

My Computer

System One

  • Operating System
    Windows 10

Ahmed79

New Member
Local time
4:50 PM
Posts
17
Thread starter
No new memory.dmp file, its still the old one.

Posting the V2 logs here.

Edit: Once my PC is logged in , it almost never crashes or hangs, it happens only during resume form hibernation.
Also another thing that I noticed is that, it doesn't usually crash on the first or second time resuming from hibernation, its usually the third or fourth time only.

Thanks.
 

Attachments

  • DESKTOP-2V23DDE-(2021-06-11_17-12-02).zip
    1.3 MB · Views: 4
Last edited:

My Computer

System One

  • Operating System
    Windows 10

zbook

Active Member
Member
VIP
Local time
6:50 PM
Posts
244
For Windows failed to resume from hibernate with error status 0xC0000001 typically hibernation is turned off.


Perform these steps in sequence.

Only advance if there are hibernation crashes.

1) Place the computer into safe mode (shift + restart) > report any problems related to hibernation
Maintain safe mode until there is a crash > post new V2
See if you can maintain the computer in safe mode for one week without a crash.

2) Change the power plan from Balanced > High performance

3) Change the power plan from High performance > Ultimate Performance

4) Make a free backup image using Macrium > save to another disk drive or the cloud
Macrium Software | Macrium Reflect Free:

5) Clean install Windows 10 (choose 1607, etc. (an old version)





4) Find RAM on the Qualified Vendor List (QVL)


5) If none of the above work then turn off hibernation

6) Microsoft may have a fee service for fixing Windows problems.
(these may be engineers offering a guarantee)




Code:
Event[8142]:
  Log Name: System
  Source: Microsoft-Windows-Kernel-Boot
  Date: 2021-06-11T14:01:51.8000000Z
  Event ID: 16
  Task: N/A
  Level: Error
  Opcode: Info
  Keyword: N/A
  User: S-1-5-18
  User Name: NT AUTHORITY\SYSTEM
  Computer: DESKTOP-2V23DDE
  Description:
Windows failed to resume from hibernate with error status 0xC0000001.
 

My Computer

System One

  • Operating System
    Windows 10

Ahmed79

New Member
Local time
4:50 PM
Posts
17
Thread starter
Okay, I shall start from booting into safe mode and then test hibernation and go forward from there step by step as mentioned by you and report back here with any developments.

Thank you once again for your time and effort in trying to help me figure this issue out.
 

My Computer

System One

  • Operating System
    Windows 10

zbook

Active Member
Member
VIP
Local time
6:50 PM
Posts
244
For this error message I've turned off hibernation.

I'd like to see a successful result from the troubleshooting so that there is a viable fix.

The website has a like button in case you missed this feature.
You are welcome.
Glad to help.
 

My Computer

System One

  • Operating System
    Windows 10
Top